Desmond Stephan

For use on coated abrasive belts and discs for removing the load caused by grinding steel, brass, plastic or wood. When used at frequent intervals it will prevent most of the load from forming and considerably increase the life of the belt or disc. Code No. Dresser No. 24110 BCA-1 Dresser for use on 200-300 grain 24310 BCA-1-NS Dresser non-sparking 200-300 24210 BCA-2 Dresser for use on 60-200 grain 24510 BCA-2-NS Dresser non-sparking 60-200 grain 24410 BCA-4 Dresser for use on 0-60 grain 24120 BCA-1 Cutter units each 24320 BCA-1-NS Cutter unit non-sparking 24220 BCA-2 Cutter units each 24520 BCA-2-NS Cutter unit non-sparking 24420 BCA-4 Cutter sets each

Read more less

For use on coated abrasive belts and discs for removing the load caused by grinding steel, brass, plastic or wood. When used at frequent intervals it will prevent most of the load from forming and considerably increase the life of the belt or disc. Code No. Dresser No. 24110 BCA-1 Dresser for use on 200-300 grain 24310 BCA-1-NS Dresser non-sparking 200-300 24210 BCA-2 Dresser for use on 60-200 grain 24510 BCA-2-NS Dresser non-sparking 60-200 grain 24410 BCA-4 Dresser for use on 0-60 grain 24120 BCA-1 Cutter units each 24320 BCA-1-NS Cutter unit non-sparking 24220 BCA-2 Cutter units each 24520 BCA-2-NS Cutter unit non-sparking 24420 BCA-4 Cutter sets each

Read more less

For use on coated abrasive belts and discs for removing the load caused by grinding steel, brass, plastic or wood. When used at frequent intervals it will prevent most of the load from forming and considerably increase the life of the belt or disc. Code No. Dresser No. 24110 BCA-1 Dresser for use on 200-300 grain 24310 BCA-1-NS Dresser non-sparking 200-300 24210 BCA-2 Dresser for use on 60-200 grain 24510 BCA-2-NS Dresser non-sparking 60-200 grain 24410 BCA-4 Dresser for use on 0-60 grain 24120 BCA-1 Cutter units each 24320 BCA-1-NS Cutter unit non-sparking 24220 BCA-2 Cutter units each 24520 BCA-2-NS Cutter unit non-sparking 24420 BCA-4 Cutter sets each

Read more less

For use on coated abrasive belts and discs for removing the load caused by grinding steel, brass, plastic or wood. When used at frequent intervals it will prevent most of the load from forming and considerably increase the life of the belt or disc. Code No. Dresser No. 24110 BCA-1 Dresser for use on 200-300 grain 24310 BCA-1-NS Dresser non-sparking 200-300 24210 BCA-2 Dresser for use on 60-200 grain 24510 BCA-2-NS Dresser non-sparking 60-200 grain 24410 BCA-4 Dresser for use on 0-60 grain 24120 BCA-1 Cutter units each 24320 BCA-1-NS Cutter unit non-sparking 24220 BCA-2 Cutter units each 24520 BCA-2-NS Cutter unit non-sparking 24420 BCA-4 Cutter sets each

Read more less

Replacement square hole type cutter sets for disc grinders. Furnished in sets of six. Code No. Cutter Type Size 30020 Cutters, 18 tooth, coarse 2 3/8" x 9/16"sq. 30040 Cutters, 30 tooth, fine 2 3/8" x 9/16"sq. 30081 Shaft 9/16"sq. x 1/2"-13 thread 30082 Berg. & Block 1/2"-13 Thread 30084 Adj. Screw Nut 11/16"-16 Thread 30085 Adj. Screw 11/16"-16 Thread

Read more less

Replacement square hole type cutter sets for disc grinders. Furnished in sets of six. Code No. Cutter Type Size 30020 Cutters, 18 tooth, coarse 2 3/8" x 9/16"sq. 30042 6 Square, 24 tooth 30081 Shaft 9/16"sq. x 1/2"-13 thread 30082 Berg. & Block 1/2"-13 Thread 30084 Adj. Screw Nut 11/16"-16 Thread 30085 Adj. Screw 11/16"-16 Thread

Read more less

For precision dressing of grinding wheels where an extremely accurate finish is required. In many cases, the use of this dresser will eliminate the use of diamonds or only necessitate diamonds for the final dressing operation. Dust protected ball bearings provide long-lasting bearing operation. The replaceable cutters are made from tool steel, carefully hardened for long wear. Code No. Dresser No. Type Wgt. / lbs. 17110 BB-1 Straight Shank 3/4" x 2-3/4" 3-3/4 17210 BB-2-L Left 3-3/4 17610 BB-2-R Right 3-3/4 17310 BB-3 Centerless 3-3/4 17410 BB-4 Surface Grinder 5-1/2 17510 BB-5 Disc (Table Type) uses BB-14-5 4 17710 BB-6 Disc (Double Disc Style) 4 17810 BB-7 Hand Held Dresser 3-1/2 17020 BB-10 Cutter Unit, Precision 1 17040 BB-10-R Cutter Unit, Roughing 1 17520 BB-10-5 Cutter Unit, Sharp Tooth 1 17720 BB-10/17-A Cutter Unit, Sharp Thick Tooth 1 17030 BB-14 Loose Cutter Set, Precision 1/2 17050 BB-14-R Loose Cutter Set, Roughing 1/2 17530 BB-14-5 Loose Cutter Set, Sharp Tooth 1/2 17770 BB-17-A Loose Sharp Thick Tooth 1/2  

Read more less

For precision dressing of grinding wheels where an extremely accurate finish is required. In many cases, the use of this dresser will eliminate the use of diamonds or only necessitate diamonds for the final dressing operation. Dust protected ball bearings provide long-lasting bearing operation. The replaceable cutters are made from tool steel, carefully hardened for long wear. Code No. Dresser No. Type Wgt. / lbs. 17110 BB-1 Straight Shank 3/4" x 2-3/4" 3-3/4 17210 BB-2-L Left 3-3/4 17610 BB-2-R Right 3-3/4 17310 BB-3 Centerless 3-3/4 17410 BB-4 Surface Grinder 5-1/2 17510 BB-5 Disc (Table Type) uses BB-14-5 4 17710 BB-6 Disc (Double Disc Style) 4 17810 BB-7 Hand Held Dresser 3-1/2 17020 BB-10 Cutter Unit, Precision 1 17040 BB-10-R Cutter Unit, Roughing 1 17520 BB-10-5 Cutter Unit, Sharp Tooth 1 17720 BB-10/17-A Cutter Unit, Sharp Thick Tooth 1 17030 BB-14 Loose Cutter Set, Precision 1/2 17050 BB-14-R Loose Cutter Set, Roughing 1/2 17530 BB-14-5 Loose Cutter Set, Sharp Tooth 1/2 17770 BB-17-A Loose Sharp Thick Tooth 1/2  

Read more less

For precision dressing of grinding wheels where an extremely accurate finish is required. In many cases, the use of this dresser will eliminate the use of diamonds or only necessitate diamonds for the final dressing operation. Dust protected ball bearings provide long-lasting bearing operation. The replaceable cutters are made from tool steel, carefully hardened for long wear. Code No. Dresser No. Type Wgt. / lbs. 17110 BB-1 Straight Shank 3/4" x 2-3/4" 3-3/4 17210 BB-2-L Left 3-3/4 17610 BB-2-R Right 3-3/4 17310 BB-3 Centerless 3-3/4 17410 BB-4 Surface Grinder 5-1/2 17510 BB-5 Disc (Table Type) uses BB-14-5 4 17710 BB-6 Disc (Double Disc Style) 4 17810 BB-7 Hand Held Dresser 3-1/2 17020 BB-10 Cutter Unit, Precision 1 17040 BB-10-R Cutter Unit, Roughing 1 17520 BB-10-5 Cutter Unit, Sharp Tooth 1 17720 BB-10/17-A Cutter Unit, Sharp Thick Tooth 1 17030 BB-14 Loose Cutter Set, Precision 1/2 17050 BB-14-R Loose Cutter Set, Roughing 1/2 17530 BB-14-5 Loose Cutter Set, Sharp Tooth 1/2 17770 BB-17-A Loose Sharp Thick Tooth 1/2  

Read more less

For precision dressing of grinding wheels where an extremely accurate finish is required. In many cases, the use of this dresser will eliminate the use of diamonds or only necessitate diamonds for the final dressing operation. Dust protected ball bearings provide long-lasting bearing operation. The replaceable cutters are made from tool steel, carefully hardened for long wear. Code No. Dresser No. Type Wgt. / lbs. 17110 BB-1 Straight Shank 3/4" x 2-3/4" 3-3/4 17210 BB-2-L Left 3-3/4 17610 BB-2-R Right 3-3/4 17310 BB-3 Centerless 3-3/4 17410 BB-4 Surface Grinder 5-1/2 17510 BB-5 Disc (Table Type) uses BB-14-5 4 17710 BB-6 Disc (Double Disc Style) 4 17810 BB-7 Hand Held Dresser 3-1/2 17020 BB-10 Cutter Unit, Precision 1 17040 BB-10-R Cutter Unit, Roughing 1 17520 BB-10-5 Cutter Unit, Sharp Tooth 1 17720 BB-10/17-A Cutter Unit, Sharp Thick Tooth 1 17030 BB-14 Loose Cutter Set, Precision 1/2 17050 BB-14-R Loose Cutter Set, Roughing 1/2 17530 BB-14-5 Loose Cutter Set, Sharp Tooth 1/2 17770 BB-17-A Loose Sharp Thick Tooth 1/2  

Read more less

For precision dressing of grinding wheels where an extremely accurate finish is required. In many cases, the use of this dresser will eliminate the use of diamonds or only necessitate diamonds for the final dressing operation. Dust protected ball bearings provide long-lasting bearing operation. The replaceable cutters are made from tool steel, carefully hardened for long wear. Code No. Dresser No. Type Wgt. / lbs. 17110 BB-1 Straight Shank 3/4" x 2-3/4" 3-3/4 17210 BB-2-L Left 3-3/4 17610 BB-2-R Right 3-3/4 17310 BB-3 Centerless 3-3/4 17410 BB-4 Surface Grinder 5-1/2 17510 BB-5 Disc (Table Type) uses BB-14-5 4 17710 BB-6 Disc (Double Disc Style) 4 17810 BB-7 Hand Held Dresser 3-1/2 17020 BB-10 Cutter Unit, Precision 1 17040 BB-10-R Cutter Unit, Roughing 1 17520 BB-10-5 Cutter Unit, Sharp Tooth 1 17720 BB-10/17-A Cutter Unit, Sharp Thick Tooth 1 17030 BB-14 Loose Cutter Set, Precision 1/2 17050 BB-14-R Loose Cutter Set, Roughing 1/2 17530 BB-14-5 Loose Cutter Set, Sharp Tooth 1/2 17770 BB-17-A Loose Sharp Thick Tooth 1/2  

Read more less

For precision dressing of grinding wheels where an extremely accurate finish is required. In many cases, the use of this dresser will eliminate the use of diamonds or only necessitate diamonds for the final dressing operation. Dust protected ball bearings provide long-lasting bearing operation. The replaceable cutters are made from tool steel, carefully hardened for long wear. Code No. Dresser No. Type Wgt. / lbs. 17110 BB-1 Straight Shank 3/4" x 2-3/4" 3-3/4 17210 BB-2-L Left 3-3/4 17610 BB-2-R Right 3-3/4 17310 BB-3 Centerless 3-3/4 17410 BB-4 Surface Grinder 5-1/2 17510 BB-5 Disc (Table Type) uses BB-14-5 4 17710 BB-6 Disc (Double Disc Style) 4 17810 BB-7 Hand Held Dresser 3-1/2 17020 BB-10 Cutter Unit, Precision 1 17040 BB-10-R Cutter Unit, Roughing 1 17520 BB-10-5 Cutter Unit, Sharp Tooth 1 17720 BB-10/17-A Cutter Unit, Sharp Thick Tooth 1 17030 BB-14 Loose Cutter Set, Precision 1/2 17050 BB-14-R Loose Cutter Set, Roughing 1/2 17530 BB-14-5 Loose Cutter Set, Sharp Tooth 1/2 17770 BB-17-A Loose Sharp Thick Tooth 1/2  

Read more less

For precision dressing of grinding wheels where an extremely accurate finish is required. In many cases, the use of this dresser will eliminate the use of diamonds or only necessitate diamonds for the final dressing operation. Dust protected ball bearings provide long-lasting bearing operation. The replaceable cutters are made from tool steel, carefully hardened for long wear. Code No. Dresser No. Type Wgt. / lbs. 17110 BB-1 Straight Shank 3/4" x 2-3/4" 3-3/4 17210 BB-2-L Left 3-3/4 17610 BB-2-R Right 3-3/4 17310 BB-3 Centerless 3-3/4 17410 BB-4 Surface Grinder 5-1/2 17510 BB-5 Disc (Table Type) uses BB-14-5 4 17710 BB-6 Disc (Double Disc Style) 4 17810 BB-7 Hand Held Dresser 3-1/2 17020 BB-10 Cutter Unit, Precision 1 17040 BB-10-R Cutter Unit, Roughing 1 17520 BB-10-5 Cutter Unit, Sharp Tooth 1 17720 BB-10/17-A Cutter Unit, Sharp Thick Tooth 1 17030 BB-14 Loose Cutter Set, Precision 1/2 17050 BB-14-R Loose Cutter Set, Roughing 1/2 17530 BB-14-5 Loose Cutter Set, Sharp Tooth 1/2 17770 BB-17-A Loose Sharp Thick Tooth 1/2  

Read more less

For precision dressing of grinding wheels where an extremely accurate finish is required. In many cases, the use of this dresser will eliminate the use of diamonds or only necessitate diamonds for the final dressing operation. Dust protected ball bearings provide long-lasting bearing operation. The replaceable cutters are made from tool steel, carefully hardened for long wear. Code No. Dresser No. Type Wgt. / lbs. 17110 BB-1 Straight Shank 3/4" x 2-3/4" 3-3/4 17210 BB-2-L Left 3-3/4 17610 BB-2-R Right 3-3/4 17310 BB-3 Centerless 3-3/4 17410 BB-4 Surface Grinder 5-1/2 17510 BB-5 Disc (Table Type) uses BB-14-5 4 17710 BB-6 Disc (Double Disc Style) 4 17810 BB-7 Hand Held Dresser 3-1/2 17020 BB-10 Cutter Unit, Precision 1 17040 BB-10-R Cutter Unit, Roughing 1 17520 BB-10-5 Cutter Unit, Sharp Tooth 1 17720 BB-10/17-A Cutter Unit, Sharp Thick Tooth 1 17030 BB-14 Loose Cutter Set, Precision 1/2 17050 BB-14-R Loose Cutter Set, Roughing 1/2 17530 BB-14-5 Loose Cutter Set, Sharp Tooth 1/2 17770 BB-17-A Loose Sharp Thick Tooth 1/2  

Read more less

The dressers hold abrasive sticks by means of the knurled chuck. New sticks may easily be inserted. Code Number Dresser Number Type 22110 No. 1 Magazine Dresser with 1/2" dia stick 22210 No. 2 Magazine Dresser with 3/4" dia stick 22410 No. 4 Magazine Dresser with 1" sq. stick 22120 No. 1 Abrasive Sticks, 6" long 22220 No. 2 Abrasive Sticks, 6" long 22420 No. 4 Abrasive Sticks, 6" long

Read more less

Mini dresser for use on (4,000 max RPM) smaller fine to medium grit tool or sharpening grinding wheels. Use at 15 degree angle to produce crush dressing action. Code Number Type 25510 Dresser  25520 Wheel 1-1/2" x 5/8" x 5/16"

Read more less

Mini dresser for use on (4,000 max RPM) smaller fine to medium grit tool or sharpening grinding wheels. Use at 15 degree angle to produce crush dressing action. Code Number Type 25510 Dresser  25520 Wheel 1-1/2" x 5/8" x 5/16"

Read more less

The abrasive wheel produces a dressing and truing action when held at an angle of 15 degrees from the axis of the wheel being dressed. Full 4" diameter by 1 1/2" face wheel mounted on double row of dust protected ball bearings.  Handles designed to protect the users hands. Code No. Dresser Type Wgt. / lbs. 25110 Double Handle Type, Hooded 5-3/4 25120 Extra Wheel 4" x 1-1/2" x 1-1/2" 1-3/4 Crackerjack Jr. Dresser in single handle type only with 3" by 1" face wheel 25410 Single handle dresser 3-1/2 25420 Extra Wheel 3" x 1" x 3/4" 3/4

Read more less

The abrasive wheel produces a dressing and truing action when held at an angle of 15 degrees from the axis of the wheel being dressed. Full 4" diameter by 1 1/2" face wheel mounted on double row of dust protected ball bearings.  Handles designed to protect the users hands. Code No. Dresser Type Wgt. / lbs. 25110 Double Handle Type, Hooded 5-3/4 25120 Extra Wheel 4" x 1-1/2" x 1-1/2" 1-3/4 Crackerjack Jr. Dresser in single handle type only with 3" by 1" face wheel 25410 Single handle dresser 3-1/2 25420 Extra Wheel 3" x 1" x 3/4" 3/4

Read more less

For use on coarse, large, high speed grinding wheels. New design permits quick cutter change by operator. Full length foot rest guides dresser evenly over rough edged tool rests. Cutter unit is fully shielded. Cutters are mounted at an angle to provide a shearing and picking action on the #58 dresser. Both cutter units revolve on sealed, dust protected ball bearings enabling them to keep up with high speed wheels. Code Number Size (For Use On Wheels) 14310 55  up to 16"  14410 58 16" to 30" Code Number Cutters Diameter Face Wgt. / lbs. 14320 55 2"  1-1/4"  3/4  14420 58 2-3/8"  2-1/4"  1-1/2  14429 58-R Roughing cutter for very hard wheels  

Read more less

For use on coarse, large, high speed grinding wheels. New design permits quick cutter change by operator. Full length foot rest guides dresser evenly over rough edged tool rests. Cutter unit is fully shielded. Cutters are mounted at an angle to provide a shearing and picking action on the #58 dresser. Both cutter units revolve on sealed, dust protected ball bearings enabling them to keep up with high speed wheels. Code Number Size (For Use On Wheels) 14310 55 up to 16" 14410 58 16" to 30" Code Number Cutters Diameter Face Wgt. / lbs. 14320 55 2" 1-1/4" 3/4 14420 58 2-3/8" 2-1/4" 1-1/2 14429 58-R Roughing cutter for very hard wheels  

Read more less

For use on coarse, large, high speed grinding wheels. New design permits quick cutter change by operator. Full length foot rest guides dresser evenly over rough edged tool rests. Cutter unit is fully shielded. Cutters are mounted at an angle to provide a shearing and picking action on the #58 dresser. Both cutter units revolve on sealed, dust protected ball bearings enabling them to keep up with high speed wheels. Code Number Size (For Use On Wheels) 14310 55  up to 16"  14410 58 16" to 30" Code Number Cutters Diameter Face Wgt. / lbs. 14320 55 2"  1-1/4"  3/4  14420 58 2-3/8"  2-1/4"  1-1/2  14429 58-R Roughing cutter for very hard wheels  

Read more less

Highest Quality And Longest Lasting Tools In The Industry The six hole hardened steel side washers provide six sets of bearing holes. When all six become worn, new side washers can easily be inserted and there is no wear on the dresser itself.  Code Number Dresser No. Diameter Face Wgt. / lbs. 13110 0 up to 10"  2"  2  13310 21 10" to 16" 3-1/2" 2 13410 5-H 16" to 24"  3" 3-1/2 13510 2 16" to 36" 4" 5-1/2

Read more less

12 CUTTERS, 4 SPACERS

Read more less