E-Z LOK’s E-Z Sonic™ ultrasonic threaded inserts are designed for post-molding installation in thermoplastic materials. Machined out of high quality brass and available with both inch and metric threads, our ultrasonic inserts are durable enough for the toughest environments and versatile enough to meet the needs of any application.
Features
Tapered and straight designs
Install ultrasonically or with heat driver
Superior torque and pull-out resistance
Inch or metric threads
Tapered design in single and double vane
Straight design in flush or flanged configuration
Applications:
Post-molding installation in thermoplastic materials
Installation:
Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Specifications
E-Z Lok P/N:
HI-524-WH
For Use in:
Thermoplastic
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Ultrasonic
Material:
Brass
System of Measurement:
Inch
Internal Thread:
5/16-24
External Thread:
N/A
Installed Length:
0.5
Drill Size:
.378
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
N/A
E-Z LOK’s E-Z Sonic™ ultrasonic threaded inserts are designed for post-molding installation in thermoplastic materials. Machined out of high quality brass and available with both inch and metric threads, our ultrasonic inserts are durable enough for the toughest environments and versatile enough to meet the needs of any application.
Features
Tapered and straight designs
Install ultrasonically or with heat driver
Superior torque and pull-out resistance
Inch or metric threads
Tapered design in single and double vane
Straight design in flush or flanged configuration
Applications:
Post-molding installation in thermoplastic materials
Installation:
Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Specifications
E-Z Lok P/N:
HI-518-WH
For Use in:
Thermoplastic
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Ultrasonic
Material:
Brass
System of Measurement:
Inch
Internal Thread:
5/16-18
External Thread:
N/A
Installed Length:
0.5
Drill Size:
.378
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
N/A
E-Z LOK’s E-Z Sonic™ ultrasonic threaded inserts are designed for post-molding installation in thermoplastic materials. Machined out of high quality brass and available with both inch and metric threads, our ultrasonic inserts are durable enough for the toughest environments and versatile enough to meet the needs of any application.
Features
Tapered and straight designs
Install ultrasonically or with heat driver
Superior torque and pull-out resistance
Inch or metric threads
Tapered design in single and double vane
Straight design in flush or flanged configuration
Applications:
Post-molding installation in thermoplastic materials
Installation:
Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Specifications
E-Z Lok P/N:
HI-428-WH
For Use in:
Thermoplastic
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Ultrasonic
Material:
Brass
System of Measurement:
Inch
Internal Thread:
1/4-28
External Thread:
N/A
Installed Length:
0.5
Drill Size:
.315
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
N/A
E-Z LOK’s E-Z Sonic™ ultrasonic threaded inserts are designed for post-molding installation in thermoplastic materials. Machined out of high quality brass and available with both inch and metric threads, our ultrasonic inserts are durable enough for the toughest environments and versatile enough to meet the needs of any application.
Features
Tapered and straight designs
Install ultrasonically or with heat driver
Superior torque and pull-out resistance
Inch or metric threads
Tapered design in single and double vane
Straight design in flush or flanged configuration
Applications:
Post-molding installation in thermoplastic materials
Installation:
Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Specifications
E-Z Lok P/N:
HI-420-WH
For Use in:
Thermoplastic
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Ultrasonic
Material:
Brass
System of Measurement:
Inch
Internal Thread:
1/4-20
External Thread:
N/A
Installed Length:
0.5
Drill Size:
.315
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
N/A
E-Z LOK’s E-Z Sonic™ ultrasonic threaded inserts are designed for post-molding installation in thermoplastic materials. Machined out of high quality brass and available with both inch and metric threads, our ultrasonic inserts are durable enough for the toughest environments and versatile enough to meet the needs of any application.
Features
Tapered and straight designs
Install ultrasonically or with heat driver
Superior torque and pull-out resistance
Inch or metric threads
Tapered design in single and double vane
Straight design in flush or flanged configuration
Applications:
Post-molding installation in thermoplastic materials
Installation:
Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Specifications
E-Z Lok P/N:
HI-324-WH
For Use in:
Thermoplastic
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Ultrasonic
Material:
Brass
System of Measurement:
Inch
Internal Thread:
3/8-24
External Thread:
N/A
Installed Length:
0.5
Drill Size:
.469
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
N/A
E-Z LOK’s E-Z Sonic™ ultrasonic threaded inserts are designed for post-molding installation in thermoplastic materials. Machined out of high quality brass and available with both inch and metric threads, our ultrasonic inserts are durable enough for the toughest environments and versatile enough to meet the needs of any application.
Features
Tapered and straight designs
Install ultrasonically or with heat driver
Superior torque and pull-out resistance
Inch or metric threads
Tapered design in single and double vane
Straight design in flush or flanged configuration
Applications:
Post-molding installation in thermoplastic materials
Installation:
Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Specifications
E-Z Lok P/N:
DV-428-TH
For Use in:
Thermoplastic
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Ultrasonic
Material:
Brass
System of Measurement:
Inch
Internal Thread:
1/4-28
External Thread:
N/A
Installed Length:
0.5
Drill Size:
See Dimensional Dwg
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
N/A
E-Z LOK’s E-Z Sonic™ ultrasonic threaded inserts are designed for post-molding installation in thermoplastic materials. Machined out of high quality brass and available with both inch and metric threads, our ultrasonic inserts are durable enough for the toughest environments and versatile enough to meet the needs of any application.
Features
Tapered and straight designs
Install ultrasonically or with heat driver
Superior torque and pull-out resistance
Inch or metric threads
Tapered design in single and double vane
Straight design in flush or flanged configuration
Applications:
Post-molding installation in thermoplastic materials
Installation:
Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend you test your particular application before ordering. Contact us for free samples.
Specifications
E-Z Lok P/N:
DV-420-TH
For Use in:
Thermoplastic
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Ultrasonic
Material:
Brass
System of Measurement:
Inch
Internal Thread:
1/4-20
External Thread:
N/A
Installed Length:
0.5
Drill Size:
See Dimensional Dwg
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
N/A
E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features:Superior hard wood holding powerSizing variety, inch (coarse/fine) & metricBrass or stainless steel optionsEasily installs with a screwdriver, bolt/jam nut, or optional drive toolApplications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.
Specifications:
E-Z Lok P/N:
400-M6-CR
For Use in:
Hard Wood
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Knife Thread
Material:
Steel - Stainless
System of Measurement:
Metric
Internal Thread:
M6-1.0
External Thread:
N/A
Installed Length:
0.5
Drill Size:
25/64
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
DT-M6
E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features:Superior hard wood holding powerSizing variety, inch (coarse/fine) & metricBrass or stainless steel optionsEasily installs with a screwdriver, bolt/jam nut, or optional drive toolApplications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.
Specifications:
E-Z Lok P/N:
400-M6
For Use in:
Hard Wood
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Knife Thread
Material:
Brass
System of Measurement:
Metric
Internal Thread:
M6-1.0
External Thread:
N/A
Installed Length:
0.5
Drill Size:
25/64
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
DT-M6
E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features:Superior hard wood holding powerSizing variety, inch (coarse/fine) & metricBrass or stainless steel optionsEasily installs with a screwdriver, bolt/jam nut, or optional drive toolApplications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.
Specifications:
E-Z Lok P/N:
400-M5-CR
For Use in:
Hard Wood
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Knife Thread
Material:
Steel - Stainless
System of Measurement:
Metric
Internal Thread:
M5-0.8
External Thread:
N/A
Installed Length:
0.5
Drill Size:
25/64
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
DT-M5
E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features:Superior hard wood holding powerSizing variety, inch (coarse/fine) & metricBrass or stainless steel optionsEasily installs with a screwdriver, bolt/jam nut, or optional drive toolApplications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.
Specifications:
E-Z Lok P/N:
400-M5
For Use in:
Hard Wood
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Knife Thread
Material:
Brass
System of Measurement:
Metric
Internal Thread:
M5-0.8
External Thread:
N/A
Installed Length:
0.5
Drill Size:
25/64
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
DT-M5
E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features:Superior hard wood holding powerSizing variety, inch (coarse/fine) & metricBrass or stainless steel optionsEasily installs with a screwdriver, bolt/jam nut, or optional drive toolApplications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.
Specifications:
E-Z Lok P/N:
400-4-CR
For Use in:
Hard Wood
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Knife Thread
Material:
Steel - Stainless
System of Measurement:
Inch
Internal Thread:
1/4-20
External Thread:
N/A
Installed Length:
0.5
Drill Size:
25/64
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
DT-4
E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features:Superior hard wood holding powerSizing variety, inch (coarse/fine) & metricBrass or stainless steel optionsEasily installs with a screwdriver, bolt/jam nut, or optional drive toolApplications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.
Specifications:
E-Z Lok P/N:
400-428-CR
For Use in:
Hard Wood
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Knife Thread
Material:
Steel - Stainless
System of Measurement:
Inch
Internal Thread:
1/4-28
External Thread:
N/A
Installed Length:
0.5
Drill Size:
25/64
Tap Size:
N/A
Minimum Full Thread Depth:
0.5
Installation Tool P/N:
DT-428
E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features:Superior hard wood holding powerSizing variety, inch (coarse/fine) & metricBrass or stainless steel optionsEasily installs with a screwdriver, bolt/jam nut, or optional drive toolApplications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.
Specifications:
E-Z Lok P/N:
400-428
For Use in:
Hard Wood
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Knife Thread
Material:
Brass
System of Measurement:
Inch
Internal Thread:
1/4-28
External Thread:
N/A
Installed Length:
0.5
Drill Size:
25/64
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
DT-428
E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features:Superior hard wood holding powerSizing variety, inch (coarse/fine) & metricBrass or stainless steel optionsEasily installs with a screwdriver, bolt/jam nut, or optional drive toolApplications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.
Specifications:
E-Z Lok P/N:
400-4
For Use in:
Hard Wood
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Knife Thread
Material:
Brass
System of Measurement:
Inch
Internal Thread:
1/4-20
External Thread:
N/A
Installed Length:
0.5
Drill Size:
25/64
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
DT-4
E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features:Superior hard wood holding powerSizing variety, inch (coarse/fine) & metricBrass or stainless steel optionsEasily installs with a screwdriver, bolt/jam nut, or optional drive toolApplications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.
Specifications:
E-Z Lok P/N:
400-3-CR
For Use in:
Hard Wood
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Knife Thread
Material:
Steel - Stainless
System of Measurement:
Inch
Internal Thread:
10-24
External Thread:
N/A
Installed Length:
0.5
Drill Size:
25/64
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
DT-3
E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features:Superior hard wood holding powerSizing variety, inch (coarse/fine) & metricBrass or stainless steel optionsEasily installs with a screwdriver, bolt/jam nut, or optional drive toolApplications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.
Specifications:
E-Z Lok P/N:
400-332-CR
For Use in:
Hard Wood
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Knife Thread
Material:
Steel - Stainless
System of Measurement:
Inch
Internal Thread:
10-32
External Thread:
N/A
Installed Length:
0.5
Drill Size:
25/64
Tap Size:
N/A
Minimum Full Thread Depth:
0.5
Installation Tool P/N:
DT-332
E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features:Superior hard wood holding powerSizing variety, inch (coarse/fine) & metricBrass or stainless steel optionsEasily installs with a screwdriver, bolt/jam nut, or optional drive toolApplications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.
Specifications:
E-Z Lok P/N:
400-332
For Use in:
Hard Wood
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Knife Thread
Material:
Brass
System of Measurement:
Inch
Internal Thread:
10-32
External Thread:
N/A
Installed Length:
0.5
Drill Size:
25/64
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
DT-332
E-Z Knife™ inserts are designed for use in hard woods, like oak, cherry, and maple. E-Z Knife™ inserts are ideal for use wherever assembly or disassembly could lead to thread erosion or stripping. Also, E-Z Knife™ inserts for wood use a proprietary external “knife” thread to slice into the wood, which provides superior holding power.E-Z Knife™ inserts are most often machined out of brass when internal thread sizes range from #4 to 3/8 or M3 to M8. For additional corrosion resistance, stainless steel knife thread inserts are used with 8-32, 10-24, and 1/4-20 internal threads.Features:Superior hard wood holding powerSizing variety, inch (coarse/fine) & metricBrass or stainless steel optionsEasily installs with a screwdriver, bolt/jam nut, or optional drive toolApplications:Cabinetry & FurniturePartitionsDisplay CasesBeer Tap HandlesShipping ContainersAnywhere a fastener will be used in woodInstallation:E-Z Knife threaded inserts are typically installed with the slots up. The slots accommodate a screwdriver or E-Z LOK drive tool. For harder woods, screwdriver installation isn't practical. Installation can be accomplished with the drive tool or using a bolt and jam nuts. When using the bolt/jam nuts installation technique, the slotted end of the insert can be either up or down.
Specifications:
E-Z Lok P/N:
400-3
For Use in:
Hard Wood
Specific Material Use:
N/A
Sub-Category:
N/A
Style:
Knife Thread
Material:
Brass
System of Measurement:
Inch
Internal Thread:
10-24
External Thread:
N/A
Installed Length:
0.5
Drill Size:
25/64
Tap Size:
N/A
Minimum Full Thread Depth:
N/A
Installation Tool P/N:
DT-3
E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts
Specifications:
E-Z Lok P/N:
319-624
For Use in:
Metal
Specific Material Use:
N/A
Sub-Category:
Thin Wall
Style:
Solid Wall
Material:
Steel - Carbon
System of Measurement:
Inch
Internal Thread:
3/8-24
External Thread:
1/2-13
Installed Length:
0.5
Drill Size:
29/64
Tap Size:
1/2-13
Minimum Full Thread Depth:
0.56
Installation Tool P/N:
500-5
E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts
Specifications:
E-Z Lok P/N:
319-6
For Use in:
Metal
Specific Material Use:
N/A
Sub-Category:
Thin Wall
Style:
Solid Wall
Material:
Steel - Carbon
System of Measurement:
Inch
Internal Thread:
3/8-16
External Thread:
1/2-13
Installed Length:
0.5
Drill Size:
29/64
Tap Size:
1/2-13
Minimum Full Thread Depth:
0.56
Installation Tool P/N:
500-5
E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts
Specifications:
E-Z Lok P/N:
313-M10
For Use in:
Metal
Specific Material Use:
N/A
Sub-Category:
Thin Wall
Style:
Solid Wall
Material:
Steel - Stainless
System of Measurement:
Metric
Internal Thread:
M10-1.5
External Thread:
N/A
Installed Length:
0.5
Drill Size:
29/64
Tap Size:
1/2-20
Minimum Full Thread Depth:
0.56
Installation Tool P/N:
500-4
E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts
Specifications:
E-Z Lok P/N:
313-624
For Use in:
Metal
Specific Material Use:
N/A
Sub-Category:
Thin Wall
Style:
Solid Wall
Material:
Steel - Stainless
System of Measurement:
Inch
Internal Thread:
3/8-24
External Thread:
1/2-20
Installed Length:
0.5
Drill Size:
29/64
Tap Size:
1/2-20
Minimum Full Thread Depth:
0.56
Installation Tool P/N:
500-4
E-Z LOK Drive Tools speed the installation of solid threaded inserts for metal, Knife Thread Inserts for hard wood and Hex Drive Thread Inserts for soft wood. A standard hex shaft allows for the use of power drills or drill presses in higher volume installations. Both styles quickly drive in the inserts without time consuming thread engagement.Features:Quickly install E-Z LOK slotted inserts, without engaging the internal threadUse with Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive InsertsFits standard power drills and drill pressesQuickly install inserts without engaging internal threadsApplications:Quickly installing Solid Threaded Inserts, Knife Thread Inserts, and Hex Drive Inserts
Specifications:
E-Z Lok P/N:
313-6
For Use in:
Metal
Specific Material Use:
N/A
Sub-Category:
Thin Wall
Style:
Solid Wall
Material:
Steel - Stainless
System of Measurement:
Inch
Internal Thread:
3/8-16
External Thread:
1/2-20
Installed Length:
0.5
Drill Size:
29/64
Tap Size:
1/2-20
Minimum Full Thread Depth:
0.56
Installation Tool P/N:
500-4
