EZ-LOK

132 products

  • E-Z LOK™ - 240-008-BR.250 Pack of 100 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - 8-32 - .250" long

    E-Z LOK E-Z LOK™ - 240-008-BR.250 Pack of 100 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - 8-32 - .250" long

    Online special order

    E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-008-BR.250 For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Inch Internal Thread: 8-32 External Thread: N/A Installed Length: 0.25 Drill Size: 7/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

    Online special order

    $20.48

  • E-Z LOK™ - 240-008-BR Pack of 50 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - 8-32

    E-Z LOK E-Z LOK™ - 240-008-BR Pack of 50 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - 8-32

    Online special order

    E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-008-BR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Inch Internal Thread: 8-32 External Thread: N/A Installed Length: 0.31 Drill Size: 7/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

    Online special order

    $11.04

  • E-Z LOK™ - 240-006-CR Pack of 10 - E-Z Press™ Threaded Insert for Plastic - Flush - 303 Stainless - 6-32

    E-Z LOK E-Z LOK™ - 240-006-CR Pack of 10 - E-Z Press™ Threaded Insert for Plastic - Flush - 303 Stainless - 6-32

    Online special order

    E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-006-CR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Steel - Stainless System of Measurement: Inch Internal Thread: 6-32 External Thread: N/A Installed Length: 0.25 Drill Size: 3/16 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

    Online special order

    $11.60

  • E-Z LOK™ - 240-006-BR Pack of 50 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - 6-32

    E-Z LOK E-Z LOK™ - 240-006-BR Pack of 50 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - 6-32

    Online special order

    E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-006-BR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Inch Internal Thread: 6-32 External Thread: N/A Installed Length: 0.25 Drill Size: 3/16 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

    Online special order

    $9.84

  • E-Z LOK™ - 240-004-CR Pack of 10 - E-Z Press™ Threaded Insert for Plastic - Flush - 303 Stainless - 4-40

    E-Z LOK E-Z LOK™ - 240-004-CR Pack of 10 - E-Z Press™ Threaded Insert for Plastic - Flush - 303 Stainless - 4-40

    Online special order

    E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-004-CR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Steel - Stainless System of Measurement: Inch Internal Thread: 4-40 External Thread: N/A Installed Length: 0.19 Drill Size: 5/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

    Online special order

    $10.08

  • E-Z LOK™ - 240-004-BR Pack of 50 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - 4-40

    E-Z LOK E-Z LOK™ - 240-004-BR Pack of 50 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - 4-40

    Online special order

    E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-004-BR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Inch Internal Thread: 4-40 External Thread: N/A Installed Length: 0.19 Drill Size: 5/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

    Online special order

    $9.44

  • E-Z LOK™ - 240-002-CR Pack of 10 - E-Z Press™ Threaded Insert for Plastic - Flush - 303 Stainless - 2-56

    E-Z LOK E-Z LOK™ - 240-002-CR Pack of 10 - E-Z Press™ Threaded Insert for Plastic - Flush - 303 Stainless - 2-56

    Online special order

    E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-002-CR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Steel - Stainless System of Measurement: Inch Internal Thread: 2-56 External Thread: N/A Installed Length: 0.16 Drill Size: 1/8 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

    Online special order

    $8.49

  • E-Z LOK™ - 240-002-BR Pack of 50 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - 2-56

    E-Z LOK E-Z LOK™ - 240-002-BR Pack of 50 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - 2-56

    Online special order

    E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-002-BR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Inch Internal Thread: 2-56 External Thread: N/A Installed Length: 0.16 Drill Size: 1/8 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

    Online special order

    $9.18

  • E-Z LOK™ - 240-000-BR Pack of 25 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - 0-80

    E-Z LOK E-Z LOK™ - 240-000-BR Pack of 25 - E-Z Press™ Threaded Insert for Plastic - Flush - Brass - 0-80

    Online special order

    E-Z Press™ inserts are threaded inserts designed for post-molding installation in either thermoset plastics or thermoplastics. A slotted design with diamond-knurled OD allows for “cold” installation with optimum torque/pull-out resistance. Cold installation of threaded inserts reduces the cost of moldings and eliminates the need to “chase” threads after molding.Our E-Z Press™ inserts are available in three styles: flush, flanged, and reverse slot. All three types press into place for fast, easy installation. Anything from a rubber mallet to an arbor press can be used for installation.Features:Install coldReduce the cost of moldingsCut reject waste caused by misaligned and faulty insertsEliminate the need to “chase” threads after moldingInstall properly without a precise hole depthInstall properly without a precise hole depthApplications:Post-molding installation in either thermoset plastics or thermoplastics Specifications: E-Z Lok P/N: 240-000-BR For Use in: Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Press-In Material: Brass System of Measurement: Inch Internal Thread: 0-80 External Thread: N/A Installed Length: 0.13 Drill Size: 3/32 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

    Online special order

    $9.91

  • E-Z LOK™ - 170-332-BR Pack of 25 - E-Z Fin™ Threaded Insert for Soft Wood or Plastic - Single fin - 10-32

    E-Z LOK E-Z LOK™ - 170-332-BR Pack of 25 - E-Z Fin™ Threaded Insert for Soft Wood or Plastic - Single fin - 10-32

    Online special order

    E-Z Fin™ (Finserts) provide strong, metal threads in soft woods, like pine, composition board, and MDF, and most plastics. Firm, permanent fastening is achieved by distributing stress over a greater surface area, minimizing the possibility of splintering, splitting, and thread erosion. Machined out of brass, E-Z Fin™ (Finserts) are available in single, double or triple fin designs for varying material thicknesses. Internal threads sizes range from #6 to 5/16. Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend that you test your particular application before ordering. We gladly supply free samples. Features Easy press-in installation Design minimizes splintering and splitting Available in 3 lengths for varying material thicknesses Applications: Soft woods: such as pine, composition board, and MDF Most Plastics Specifications E-Z Lok P/N: 170-332-BR For Use in: Soft Wood, Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Finsert Material: Brass System of Measurement: Inch Internal Thread: 10-32 External Thread: N/A Installed Length: 0.19 Drill Size: G Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

    Online special order

    $20.15

  • E-Z LOK™ - 170-008-BR Pack of 25 - E-Z Fin™ Threaded Insert for Soft Wood or Plastic - Single fin - 8-32

    E-Z LOK E-Z LOK™ - 170-008-BR Pack of 25 - E-Z Fin™ Threaded Insert for Soft Wood or Plastic - Single fin - 8-32

    Online special order

    E-Z Fin™ (Finserts) provide strong, metal threads in soft woods, like pine, composition board, and MDF, and most plastics. Firm, permanent fastening is achieved by distributing stress over a greater surface area, minimizing the possibility of splintering, splitting, and thread erosion. Machined out of brass, E-Z Fin™ (Finserts) are available in single, double or triple fin designs for varying material thicknesses. Internal threads sizes range from #6 to 5/16. Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend that you test your particular application before ordering. We gladly supply free samples. Features Easy press-in installation Design minimizes splintering and splitting Available in 3 lengths for varying material thicknesses Applications: Soft woods: such as pine, composition board, and MDF Most Plastics Specifications E-Z Lok P/N: 170-008-BR For Use in: Soft Wood, Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Finsert Material: Brass System of Measurement: Inch Internal Thread: 8-32 External Thread: N/A Installed Length: 0.19 Drill Size: 15/64 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

    Online special order

    $13.83

  • E-Z LOK™ - 170-006-BR Pack of 25 - E-Z Fin™ Threaded Insert for Soft Wood or Plastic - Single fin - 6-32

    E-Z LOK E-Z LOK™ - 170-006-BR Pack of 25 - E-Z Fin™ Threaded Insert for Soft Wood or Plastic - Single fin - 6-32

    Online special order

    E-Z Fin™ (Finserts) provide strong, metal threads in soft woods, like pine, composition board, and MDF, and most plastics. Firm, permanent fastening is achieved by distributing stress over a greater surface area, minimizing the possibility of splintering, splitting, and thread erosion. Machined out of brass, E-Z Fin™ (Finserts) are available in single, double or triple fin designs for varying material thicknesses. Internal threads sizes range from #6 to 5/16. Important Note: Hole size requirements may vary depending on a number of factors, including material and tools. We recommend that you test your particular application before ordering. We gladly supply free samples. Features Easy press-in installation Design minimizes splintering and splitting Available in 3 lengths for varying material thicknesses Applications: Soft woods: such as pine, composition board, and MDF Most Plastics Specifications E-Z Lok P/N: 170-006-BR For Use in: Soft Wood, Thermoset Plastic, Thermoplastic Specific Material Use: N/A Sub-Category: N/A Style: Finsert Material: Brass System of Measurement: Inch Internal Thread: 6-32 External Thread: N/A Installed Length: 0.19 Drill Size: #5 Tap Size: N/A Minimum Full Thread Depth: N/A Installation Tool P/N: N/A

    Online special order

    $13.10

Login

Forgot your password?

Don't have an account yet?
Create account